cartmanerian15 need help to clarify doubt about : How can i get my vaccum cleaner to work?
I have a Hoover Wind-tunnel bag-less vacuum and it doesnt seem to pick up anything from my carpet. I took out the hair and cleaned the bottom of the vacuum really well and when i use my vacuum it barely picks up anything and also it doesnt go inside the bag-less chamber, the dirt is stored somewhere else and its supposed to go in the top portion of my vacuum where all the dirt goes. HELP! whats wrong with it and how do i fix it
Try this:
Answer by Alia
lol thats a funny question to ask on the cars & transportation section…hmm maybe its permanently broken get a new one XD
Give your answer to this question below!
There is a filter that the incoming air passes through right before it enter the bagless chamber. If that filter is clogged, wash it out with water and try again. If you already did that, remove the filter, get a coat hanger and bend it so that you can stick it down the tube right before the filter; there is likely something like a sock stuck in there that you can dislodge.
Some vacuums have another filter on the front of them. This is water washable on most newer vacuums.
Failing that, get a screwdriver and take the vacuum apart one piece at a time until you find either a clog or an air leak. Vacuums are simple, so this is an easy job. If you can’t get it back together again, you just buy a new vacuum, which you were probably going to buy anyway. Worth a try.
the pipe must be blocked where it fits to the hoover you could have a poke with a crochet hook plug pulled out mind ,